1982 Nissan Laurel tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1982 Nissan Laurel.

1982 Nissan Laurel tire sizes

185/70R14

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1981 – 1985 3 trims

95 hp · L20A I6 185/70 R14 88S 1 fitment

GenerationIV (C31) 1981–1985

Power95 hp

EngineL20A I6, Petrol

Center bore73.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 88S	14x5.5 ET24 ~~4x114.3~~	32	Tires Rims

111 hp · L24 I6 185/70 R14 88S 1 fitment

GenerationIV (C31) 1981–1985

Power111 hp

EngineL24 I6, Petrol

Center bore73.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 88S	14x5.5 ET24 ~~4x114.3~~	32	Tires Rims

83 hp · LD28 I6 185/70 R14 88S 1 fitment

GenerationIV (C31) 1981–1985

Power83 hp

EngineLD28 I6, Diesel

Center bore73.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 88S	14x5.5 ET24 ~~4x114.3~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.