Skip to content

1986 Nissan Laurel tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1986 Nissan Laurel.

1986 Nissan Laurel tire sizes

Bolt pattern
Fitment tables

4 trims sold in 1986

Open a trim for its factory package and every alternative size, front and rear.

Nissan Laurel V (C32)

1984 – 1989 4 trims

Laurel 2.0

102 hp · CA20S I4 185/70 HR14 3 fitments
GenerationV (C32) 1984–1989
Power102 hp
EngineCA20S I4, Petrol
Center bore66.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 HR1414x5.5 ET30 4x114.329TiresRims
195/70 HR1414x5.5 ET35 4x114.329TiresRims
195/70 HR1414x5.5 ET30 4x114.329TiresRims

Laurel 2.4

126 hp · L24E L24S I6 185/70 HR14 4 fitments
GenerationV (C32) 1984–1989
Power126 hp
EngineL24E L24S I6, Petrol
Center bore66.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 HR1414x5.5 ET30 4x114.329TiresRims
195/70 HR1414x5.5 ET35 4x114.329TiresRims
195/70 HR1414x5.5 ET30 4x114.329TiresRims
205/60 VR1515x6 ET30 4x114.329TiresRims

Laurel 2.8 D

83 hp · LD28 I6 185/70 HR14 4 fitments
GenerationV (C32) 1984–1989
Power83 hp
EngineLD28 I6, Diesel
Center bore66.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 HR1414x5.5 ET30 4x114.329TiresRims
195/70 HR1414x5.5 ET35 4x114.329TiresRims
195/70 HR1414x5.5 ET30 4x114.329TiresRims
205/60 VR1515x6 ET30 4x114.329TiresRims

Laurel 2.8 D

89 hp · RD28 I6 185/70 HR14 4 fitments
GenerationV (C32) 1984–1989
Power89 hp
EngineRD28 I6, Diesel
Center bore66.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 HR1414x5.5 ET30 4x114.329TiresRims
195/70 HR1414x5.5 ET35 4x114.329TiresRims
195/70 HR1414x5.5 ET30 4x114.329TiresRims
205/60 R15 89H15x6 ET30 4x114.329TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.