2010 Nissan NP300 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Nissan NP300.

2010 Nissan NP300 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2014 – 2020 1 trim

131 hp · 2.5L YD25 I4 195x R15 5 fitments

GenerationNP300 2014–2020

Power131 hp

Engine2.5L YD25 I4, Diesel

Center bore100 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195x R15	15x6.5 ET40 ~~6x139.7~~	–	Tires Rims
215/80 R15	15x6.5 ET40 ~~6x139.7~~	–	Tires Rims
245/70 R16 105S	16x7 ET40 ~~6x139.7~~	–	Tires Rims
255/70 R16 111S	16x7 ET40 ~~6x139.7~~	–	Tires Rims
265/70 R16 112S	16x7 ET40 ~~6x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.