Skip to content

2014 Nissan NP300 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Nissan NP300.

2014 Nissan NP300 tire sizes

Bolt patterns
6x114.3
NP300
6x139.7
NP300
Fitment tables

3 trims sold in 2014

Open a trim for its factory package and every alternative size, front and rear.

Nissan NP300 NP300

2014 – 2020 3 trims

NP300 2.3 dCi

158 hp · YS23 I4 205x R16 3 fitments
GenerationNP300 2014–2020
MarketLatin America
Power158 hp
EngineYS23 I4, Diesel
Center bore66.1 mm
PCD6x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205x R1616x7 ET45 6x114.3–TiresRims
255/70 R1616x7 ET45 6x114.3–TiresRims
255/60 R1818x7 ET45 6x114.3–TiresRims

NP300 2.5 dCi

131 hp · 2.5L YD25 I4 195x R15 5 fitments
GenerationNP300 2014–2020
MarketEurope
Power131 hp
Engine2.5L YD25 I4, Diesel
Center bore100 mm
PCD6x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195x R1515x6.5 ET40 6x139.7–TiresRims
215/80 R1515x6.5 ET40 6x139.7–TiresRims
245/70 R16 105S16x7 ET40 6x139.7–TiresRims
255/70 R16 111S16x7 ET40 6x139.7–TiresRims
265/70 R16 112S16x7 ET40 6x139.7–TiresRims

NP300 2.5i

166 hp · QR25 I4 205x R16 3 fitments
GenerationNP300 2014–2020
MarketLatin America
Power166 hp
EngineQR25 I4, Petrol
Center bore66.1 mm
PCD6x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205x R1616x7 ET45 6x114.3–TiresRims
255/70 R1616x7 ET45 6x114.3–TiresRims
255/60 R1818x7 ET45 6x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.