1985 Nissan Prairie tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1985 Nissan Prairie.

1985 Nissan Prairie tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1982 – 1988 3 trims

74 hp · I4 185/70 R14 86T 1 fitment

GenerationI (M10) 1982–1988

Power74 hp

EngineI4, Petrol

Center bore66.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 86T	14x5 ET45 ~~4x114.3~~	2	Tires Rims

87 hp · I4 185/70 R13 86T / 195/70 R14 1 fitment

GenerationI (M10) 1982–1988

Power87 hp

EngineI4, Petrol

Center bore66.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front185/70 R13 86T	13x5 ET45 ~~4x114.3~~	28	Tires Rims
Rear195/70 R14	14x6 ET30 ~~4x114.3~~	29	Tires Rims

89 hp · I4 185/70 R13 86T 1 fitment

GenerationI (M10) 1982–1988

Power89 hp

EngineI4, Petrol

Center bore66.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R13 86T	14x6 ET30 ~~4x114.3~~	2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.