2004 Oldsmobile Bravada tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Oldsmobile Bravada.

2004 Oldsmobile Bravada tire sizes

245/65R17 255/60R17

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2002 – 2004 USA market 1 trim

275 hp · I6 245/65 R17 105S 2 fitments

GenerationIII 2002–2004

Power275 hp

EngineI6, Petrol

Center bore78.3 mm

PCD6x127

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/65 R17 105S	17x7 ET50 ~~6x127~~	32	Tires Rims
255/60 R17 105S	17x7 ET50 ~~6x127~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.