1961 Oldsmobile Cutlass tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1961 Oldsmobile Cutlass.

1961 Oldsmobile Cutlass tire sizes

205/75RS14 225/70RS14

Bolt pattern

5x120.65

Other years

1961 1962 1963 1964 1965 1966 1967 1968 All 1961–1999

Fitment tables

4 trims sold in 1961

Open a trim for its factory package and every alternative size, front and rear.

Oldsmobile Cutlass I Y-body

1961 – 1963 USA market 4 trims

Cutlass 3.5 2-bbl

156 hp · V8 205/75 SR14 2 fitments

GenerationI Y-body 1961–1963

Power156 hp

EngineV8, Petrol

Center bore70.3 mm

PCD5x120.65

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 SR14	14x6 ET0 ~~5x120.65~~	–	Tires Rims
225/70 SR14	14x7 ET0 ~~5x120.65~~	–	Tires Rims

Cutlass 3.5 4-bbl

185 hp · V8 205/75 SR14 2 fitments

GenerationI Y-body 1961–1963

Power185 hp

EngineV8, Petrol

Center bore70.3 mm

PCD5x120.65

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 SR14	14x6 ET0 ~~5x120.65~~	–	Tires Rims
225/70 SR14	14x7 ET0 ~~5x120.65~~	–	Tires Rims

Cutlass 3.5 4-bbl HC

194 hp · V8 205/75 SR14 2 fitments

GenerationI Y-body 1961–1963

Power194 hp

EngineV8, Petrol

Center bore70.3 mm

PCD5x120.65

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 SR14	14x6 ET0 ~~5x120.65~~	–	Tires Rims
225/70 SR14	14x7 ET0 ~~5x120.65~~	–	Tires Rims

Cutlass 3.5 Turbo

215 hp · V8 205/75 SR14 2 fitments

GenerationI Y-body 1961–1963

Power215 hp

EngineV8, Petrol

Center bore70.3 mm

PCD5x120.65

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 SR14	14x6 ET0 ~~5x120.65~~	–	Tires Rims
225/70 SR14	14x7 ET0 ~~5x120.65~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.