Skip to content
tirewheelguide.com

1979 Peugeot 305 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1979 Peugeot 305.

1979 Peugeot 305 tire sizes

170/65R14165/70RS14185/60RH14
Bolt pattern
Other years
19771978197919801981198219831984 All 1977–1989
Fitment tables

3 trims sold in 1979

Open a trim for its factory package and every alternative size, front and rear.

Peugeot 305 Phase 1

1977 – 1982 3 trims

305 1.3

64 hp · 1.3L XL5 I4 145x SR14 4 fitments
GenerationPhase 1 1977–1982
Power64 hp
Engine1.3L XL5 I4, Petrol
Center bore63.5 mm
PCD3x105
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145x SR1414x4.5 ET23 3x1052.1TiresRims
155x SR1414x4.5 ET23 3x1052.1TiresRims
165/70 SR1414x4.5 ET23 3x1052TiresRims
170/65 R1414x4.5 ET23 3x1051.9TiresRims

305 1.5

72 hp · 1.5L XR5 I4 165/70 SR14 4 fitments
GenerationPhase 1 1977–1982
Power72 hp
Engine1.5L XR5 I4, Petrol
Center bore63.5 mm
PCD3x105
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 SR1414x4.5 ET23 3x1052TiresRims
155x SR1414x4.5 ET23 3x1052TiresRims
170/65 R1414x4.5 ET23 3x1051.9TiresRims
185/60 HR1414x5.5 ET25 3x1052.1TiresRims

305 1.6D

50 hp · 1.55L XIDL I4 145x SR14 4 fitments
GenerationPhase 1 1977–1982
Power50 hp
Engine1.55L XIDL I4, Diesel
Center bore63.5 mm
PCD3x105
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145x SR1414x4.5 ET23 3x1052.1TiresRims
155x SR1414x4.5 ET23 3x1052.1TiresRims
165/70 SR1414x4.5 ET23 3x1052TiresRims
170/65 R1414x4.5 ET23 3x1051.9TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading