Skip to content

1982 Peugeot 305 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1982 Peugeot 305.

1982 Peugeot 305 tire sizes

Bolt pattern
Fitment tables

4 trims sold in 1982

Open a trim for its factory package and every alternative size, front and rear.

Peugeot 305 Phase 1

1977 – 1982 4 trims

305 1.3

64 hp · 1.3L XL5 I4 145x SR14 4 fitments
GenerationPhase 1 1977–1982
Power64 hp
Engine1.3L XL5 I4, Petrol
Center bore63.5 mm
PCD3x105
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145x SR1414x4.5 ET23 3x1052.1TiresRims
155x SR1414x4.5 ET23 3x1052.1TiresRims
165/70 SR1414x4.5 ET23 3x1052TiresRims
170/65 R1414x4.5 ET23 3x1051.9TiresRims

305 1.5

72 hp · 1.5L XR5 I4 165/70 SR14 4 fitments
GenerationPhase 1 1977–1982
Power72 hp
Engine1.5L XR5 I4, Petrol
Center bore63.5 mm
PCD3x105
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 SR1414x4.5 ET23 3x1052TiresRims
155x SR1414x4.5 ET23 3x1052TiresRims
170/65 R1414x4.5 ET23 3x1051.9TiresRims
185/60 HR1414x5.5 ET25 3x1052.1TiresRims

305 1.5

87 hp · 1.5L XR5S I4 170/65 R14 4 fitments
GenerationPhase 1 1977–1982
Power87 hp
Engine1.5L XR5S I4, Petrol
Center bore63.5 mm
PCD3x105
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
170/65 R1414x4.5 ET23 3x1051.9TiresRims
165/70 SR1414x4.5 ET23 3x1052TiresRims
185/60 HR1414x5.5 ET25 3x1052.1TiresRims
195/55 HR1515x5.5 ET25 3x1052.1TiresRims

305 1.6D

50 hp · 1.55L XIDL I4 145x SR14 4 fitments
GenerationPhase 1 1977–1982
Power50 hp
Engine1.55L XIDL I4, Diesel
Center bore63.5 mm
PCD3x105
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145x SR1414x4.5 ET23 3x1052.1TiresRims
155x SR1414x4.5 ET23 3x1052.1TiresRims
165/70 SR1414x4.5 ET23 3x1052TiresRims
170/65 R1414x4.5 ET23 3x1051.9TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.