Skip to content

2024 Peugeot 508 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Peugeot 508.

2024 Peugeot 508 tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

Peugeot 508 II (R83) Facelift

2023 – 2025 3 trims

508 1.2 PureTech

129 hp · 1.2 L Petrol 1.2 L 215/60 R16 5 fitments
GenerationII (R83) Facelift 2023–2025
MarketEurope
Power129 hp
Engine1.2 L Petrol 1.2 L, Petrol
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/60 R1616x7 ET40 5x10836TiresRims
OE215/55 ZR1717x7 ET40 5x10836TiresRims
Alt235/50 ZR1717x7.5 ET40 5x10836TiresRims
Alt235/45 ZR1818x8 ET44 5x10836TiresRims
Alt235/40 ZR1919x8 ET44 5x10839TiresRims

508 1.5 BlueHDi

129 hp · 1.5 L Diesel 1.5 L 215/60 R16 5 fitments
GenerationII (R83) Facelift 2023–2025
MarketEurope
Power129 hp
Engine1.5 L Diesel 1.5 L, Diesel
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/60 R1616x7 ET40 5x10836TiresRims
OE215/55 ZR1717x7 ET40 5x10836TiresRims
Alt235/50 ZR1717x7.5 ET40 5x10836TiresRims
Alt235/45 ZR1818x8 ET44 5x10836TiresRims
Alt235/40 ZR1919x8 ET44 5x10839TiresRims

508 1.6 PureTech PHEV

355 hp · 1.6 L Hybrid 1.6 L x 2 fitments
GenerationII (R83) Facelift 2023–2025
MarketEurope
Power355 hp
Engine1.6 L Hybrid 1.6 L, Hybrid
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OEx 5x108Tires
OEx 5x108Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.