Skip to content

1994 Plymouth Neon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1994 Plymouth Neon.

Bolt patterns
5x100
PL I
4x100
PL I
Fitment tables

2 trims sold in 1994

Open a trim for its factory package and every alternative size, front and rear.

Plymouth Neon PL I

1994 – 1999 USA market 2 trims

Neon 2.0i DOHC

148 hp · ECC I4 185/70 R13 87S 5 fitments
GenerationPL I 1994–1999
Power148 hp
EngineECC I4, Petrol
Center bore57.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R13 87S13x5 ET40 5x10029TiresRims
185/65 R14 85H14x5.5 ET40 5x10032TiresRims
185/65 R14 85H14x6 ET40 5x10032TiresRims
185/60 R15 87H15x6 ET40 5x10032TiresRims
195/55 R15 85V15x6 ET40 5x10032TiresRims

Neon 2.0i SOHC

131 hp · A588 I4 165/80 R13 87S 5 fitments
GenerationPL I 1994–1999
Power131 hp
EngineA588 I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/80 R13 87S13x5 ET40 4x10029TiresRims
185/70 R13 87S13x5.5 ET40 4x10029TiresRims
175/70 R14 87S14x5 ET40 4x10029TiresRims
185/65 R14 85H14x5.5 ET40 4x10032TiresRims
185/60 R15 85U15x6 ET40 4x10032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.