Skip to content

1998 Plymouth Neon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Plymouth Neon.

1998 Plymouth Neon tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1998

Open a trim for its factory package and every alternative size, front and rear.

Plymouth Neon PL I

1994 – 1999 USA market 2 trims

Neon 2.0i DOHC

148 hp · ECC I4 185/65 R14 85H 5 fitments
GenerationPL I 1994–1999
Power148 hp
EngineECC I4, Petrol
Center bore57.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R14 85H14x5.5 ET40 5x10032TiresRims
185/65 R14 85H14x6 ET40 5x10032TiresRims
195/60 R14 87H14x6 ET45 5x10032TiresRims
195/55 R15 85V15x6.5 ET40 5x10032TiresRims
205/45 R16 83V16x7 ET35 5x10035TiresRims

Neon 2.0i SOHC

131 hp · A588 I4 185/65 R14 85H 5 fitments
GenerationPL I 1994–1999
Power131 hp
EngineA588 I4, Petrol
Center bore57.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R14 85H14x5.5 ET40 5x10032TiresRims
185/65 R14 85H14x6 ET40 5x10032TiresRims
195/60 R14 87H14x6 ET45 5x10032TiresRims
195/55 R15 85V15x6 ET40 5x10032TiresRims
195/50 R16 83V16x6.5 ET40 5x10035TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.