1981 Plymouth Reliant tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1981 Plymouth Reliant.

1981 Plymouth Reliant tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1981 – 1985 USA market 2 trims

82 hp · I4 175/80 R13 89S 4 fitments

GenerationK-body 1981–1985

Power82 hp

EngineI4, Petrol

Center bore57.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/80 R13 89S	13x5 ET37 ~~4x100~~	26	Tires Rims
185/70 R14 89S	14x5.5 ET40 ~~4x100~~	29	Tires Rims
185/65 R15 88S	15x5.5 ET40 ~~4x100~~	29	Tires Rims
185/65 R15 88S	15x6 ET40 ~~4x100~~	29	Tires Rims

114 hp · G54B I4 185/70 R14 89S 4 fitments

GenerationK-body 1981–1985

Power114 hp

EngineG54B I4, Petrol

Center bore57.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 89S	14x5.5 ET40 ~~4x100~~	29	Tires Rims
185/65 R15 88S	15x5.5 ET40 ~~4x100~~	29	Tires Rims
185/65 R15 88S	15x6 ET40 ~~4x100~~	29	Tires Rims
195/60 R15 89S	15x6 ET40 ~~4x100~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.