Skip to content

1971 Porsche 911 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1971 Porsche 911.

Bolt pattern
Fitment tables

6 trims sold in 1971

Open a trim for its factory package and every alternative size, front and rear.

Porsche 911 II (911) Mk1

1969 – 1973 Europe market 6 trims

911 2.2 E

153 hp · F6 185/70 VR15 / 215/60 VR15 4 fitments
GenerationII (911) Mk1 1969–1973
Power153 hp
EngineF6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front185/70 VR1515x6 ET36 5x13026TiresRims
Rear215/60 VR1515x7 ET23 5x13029TiresRims
Front195/60 VR1616x6.5 ET30 5x13026TiresRims
Rear215/55 VR1616x7.5 ET20 5x13029TiresRims
185/70 VR1515x6 ET36 5x1302TiresRims
195/60 VR1616x6.5 ET30 5x1302TiresRims

911 2.2 S

177 hp · F6 195/60 VR16 / 215/55 VR16 4 fitments
GenerationII (911) Mk1 1969–1973
Power177 hp
EngineF6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front195/60 VR1616x6.5 ET30 5x13026TiresRims
Rear215/55 VR1616x7.5 ET20 5x13029TiresRims
185/70 VR1515x6 ET36 5x1302TiresRims
185/70 VR1515x6 ET36 5x1302TiresRims
195/60 VR1616x6.5 ET30 5x1302.2TiresRims

911 2.2 T

123 hp · F6 165x HR15 4 fitments
GenerationII (911) Mk1 1969–1973
Power123 hp
EngineF6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165x HR1515x5.5 ET36 5x1302TiresRims
185/70 HR1515x5.5 ET36 5x1302TiresRims
185/70 VR1515x6 ET36 5x1302TiresRims
185/70 VR1515x7 ET23 5x1302TiresRims

911 2.4 E

162 hp · F6 185/70 VR15 4 fitments
GenerationII (911) Mk1 1969–1973
Power162 hp
EngineF6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 VR1515x6 ET36 5x1302TiresRims
185/70 VR1515x7 ET23 5x1302TiresRims
195/60 VR1616x6.5 ET30 5x1302.2TiresRims
195/60 VR1616x7.5 ET20 5x1302.2TiresRims

911 2.4 S

188 hp · F6 185/70 VR15 4 fitments
GenerationII (911) Mk1 1969–1973
Power188 hp
EngineF6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 VR1515x6 ET36 5x1302TiresRims
185/70 VR1515x7 ET23 5x1302TiresRims
195/60 VR1616x6.5 ET30 5x1302.2TiresRims
195/60 VR1616x7.5 ET20 5x1302.2TiresRims

911 2.4 T

129 hp · F6 165x HR15 4 fitments
GenerationII (911) Mk1 1969–1973
Power129 hp
EngineF6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165x HR1515x5.5 ET36 5x1302TiresRims
185/70 HR1515x5.5 ET36 5x1302TiresRims
185/70 VR1515x6 ET36 5x1302TiresRims
185/70 VR1515x7 ET23 5x1302TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.