Skip to content

1967 Porsche 911 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1967 Porsche 911.

Bolt pattern
Fitment tables

4 trims sold in 1967

Open a trim for its factory package and every alternative size, front and rear.

Porsche 911 I (901)

1964 – 1969 Europe market 4 trims

911 2.0

129 hp · F6 165x HR15 4 fitments
GenerationI (901) 1964–1969
Power129 hp
EngineF6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165x HR1515x4.5 5x1302TiresRims
165x HR1515x5.5 5x1302TiresRims
185/70 HR1515x5.5 5x1302TiresRims
185/70 VR1515x6 5x1302TiresRims

911 2.0 R

201 hp · F6 185/70 VR15 / 215/60 VR15 4 fitments
GenerationI (901) 1964–1969
Power201 hp
EngineF6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front185/70 VR1515x6 5x13026TiresRims
Rear215/60 VR1515x7 5x13029TiresRims
Front195/60 VR1616x6.5 5x13026TiresRims
Rear215/55 VR1616x7.5 5x13029TiresRims
185/70 VR1515x6 5x1302TiresRims
195/60 VR1616x6.5 5x1302TiresRims

911 2.0 S

158 hp · F6 185/70 VR15 4 fitments
GenerationI (901) 1964–1969
Power158 hp
EngineF6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 VR1515x6 6J 5x1302TiresRims
185/70 VR1515x7 7J 5x1302TiresRims
195/60 VR1616x6.5 6.5J 5x1302.2TiresRims
195/60 VR1616x7.5 7.5J 5x1302.2TiresRims

911 2.0 T

109 hp · F6 165x HR15 4 fitments
GenerationI (901) 1964–1969
Power109 hp
EngineF6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165x HR1515x4.5 4.5J 5x1302TiresRims
165x HR1515x5.5 5.5J 5x1302TiresRims
185/70 HR1515x5.5 5.5J 5x1302TiresRims
185/70 VR1515x6 6J 5x1302TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.