Skip to content

2001 Renault Avantime tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Renault Avantime.

2001 Renault Avantime tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear.

Renault Avantime DE0

2001 – 2004 Europe market 3 trims

Avantime 2.0T

165 hp · 2.0L F4Rt I4 225/55 R16 95H 4 fitments
GenerationDE0 2001–2004
Power165 hp
Engine2.0L F4Rt I4, Petrol
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R16 95H16x7 ET42 5x1082.2TiresRims
225/55 R16 95H16x7.5 ET42 5x1082.2TiresRims
235/50 R17 96V17x7.5 ET42 5x1082.2TiresRims
235/45 R18 94V18x7.5 ET40 5x1082.2TiresRims

Avantime 2.2 dCi

148 hp · 2.2L G9T I4 225/55 R16 95H 4 fitments
GenerationDE0 2001–2004
Power148 hp
Engine2.2L G9T I4, Diesel
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R16 95H16x7 ET42 5x1082.3TiresRims
225/55 R16 95H16x7.5 ET42 5x1082.3TiresRims
235/50 R17 96V17x7.5 ET42 5x1082.2TiresRims
235/45 R18 94V18x7.5 ET40 5x1082.3TiresRims

Avantime 3.0i

210 hp · 3.0L ES9 V6 225/55 R16 95H 4 fitments
GenerationDE0 2001–2004
Power210 hp
Engine3.0L ES9 V6, Petrol
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R16 95H16x7 ET42 5x1082.3TiresRims
225/55 R16 95H16x7.5 ET42 5x1082.3TiresRims
235/50 R17 96V17x7.5 ET42 5x1082.2TiresRims
235/45 R18 94V18x8 ET40 5x1082.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.