Skip to content
tirewheelguide.com

2002 Renault Avantime tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Renault Avantime.

2002 Renault Avantime tire sizes

225/55R16235/50R17235/45R18
Bolt pattern
Other years
2001200220032004 All 2001–2004
Fitment tables

3 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

Renault Avantime DE0

2001 – 2004 Europe market 3 trims

Avantime 2.0T

165 hp · 2.0L F4Rt I4 225/55 R16 95H 4 fitments
GenerationDE0 2001–2004
Power165 hp
Engine2.0L F4Rt I4, Petrol
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R16 95H16x7 ET42 5x1082.2TiresRims
225/55 R16 95H16x7.5 ET42 5x1082.2TiresRims
235/50 R17 96V17x7.5 ET42 5x1082.2TiresRims
235/45 R18 94V18x7.5 ET40 5x1082.2TiresRims

Avantime 2.2 dCi

148 hp · 2.2L G9T I4 225/55 R16 95H 4 fitments
GenerationDE0 2001–2004
Power148 hp
Engine2.2L G9T I4, Diesel
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R16 95H16x7 ET42 5x1082.3TiresRims
225/55 R16 95H16x7.5 ET42 5x1082.3TiresRims
235/50 R17 96V17x7.5 ET42 5x1082.2TiresRims
235/45 R18 94V18x7.5 ET40 5x1082.3TiresRims

Avantime 3.0i

210 hp · 3.0L ES9 V6 225/55 R16 95H 4 fitments
GenerationDE0 2001–2004
Power210 hp
Engine3.0L ES9 V6, Petrol
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R16 95H16x7 ET42 5x1082.3TiresRims
225/55 R16 95H16x7.5 ET42 5x1082.3TiresRims
235/50 R17 96V17x7.5 ET42 5x1082.2TiresRims
235/45 R18 94V18x8 ET40 5x1082.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading