Skip to content

2005 Suzuki Escudo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Suzuki Escudo.

Bolt patterns
5x114.3
III (TA7/TD5/TD9)
5x139.7
II (TL)

2 generations were sold in 2005. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Suzuki Escudo III (TA7/TD5/TD9)

2005 – 2008 Japan market 2 trims

Escudo 2.0i (CBA-TD54W)

143 hp · J20A I4 225/70 R16 102S 3 fitments
GenerationIII (TA7/TD5/TD9) 2005–2008
Power143 hp
EngineJ20A I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
225/70 R16 102S16x6.5 ET45 5x114.332TiresRims
225/65 R17 101S17x6.5 ET45 5x114.332TiresRims
225/60 R18 100H18x6.5 ET45 5x114.332TiresRims

Escudo 2.7i (CBA-TD94W)

181 hp · H27A I4 225/65 R17 101S 3 fitments
GenerationIII (TA7/TD5/TD9) 2005–2008
Power181 hp
EngineH27A I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
225/65 R17 101S17x6.5 ET45 5x114.332TiresRims
225/60 R18 100H18x6.5 ET45 5x114.332TiresRims
245/55 R18 99V18x7 ET42 5x114.332TiresRims

Suzuki Escudo II (TL)

1997 – 2005 Japan market 1 trim

Escudo 2.0i (LA-TL52W)

138 hp · J20A V6 235/60 R16 100H 3 fitments
GenerationII (TL) 1997–2005
Power138 hp
EngineJ20A V6, Petrol
Center bore108.1 mm
PCD5x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
235/60 R16 100H16x7 ET5 5x139.729TiresRims
235/55 R17 97H17x7 ET5 5x139.730TiresRims
235/50 R18 97V18x7.5 ET0 5x139.733TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.