1990 Toyota Corona SF tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1990 Toyota Corona SF.

1990 Toyota Corona SF tire sizes

Bolt patterns

T170

T170

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1987 – 1992 3 trims

114 hp · I4 165x R13 2 fitments

GenerationT170 1987–1992

Power114 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x R13	13x5 ET39 ~~4x100~~	–	Tires Rims
185/70 R13 85S	13x5.5 ET39 ~~4x100~~	–	Tires Rims

123 hp · I4 185/65 R14 85S 1 fitment

GenerationT170 1987–1992

Power123 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R14 85S	14x6 ET45 ~~5x100~~	–	Tires Rims

162 hp · I4 195/60 R14 85H 1 fitment

GenerationT170 1987–1992

Power162 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R14 85H	14x6 ET45 ~~5x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.