1995 Toyota Corona SF tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Toyota Corona SF.

1995 Toyota Corona SF tire sizes

185/65R14 175/70R14

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1992 – 1996 2 trims

123 hp · I4 175/70 R14 84S 2 fitments

GenerationT190 1992–1996

Power123 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R14 84S	14x5.5 ET45 ~~5x100~~	–	Tires Rims
185/65 R14 85S	14x6 ET45 ~~5x100~~	–	Tires Rims

138 hp · I4 185/65 R14 85S 1 fitment

GenerationT190 1992–1996

Power138 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R14 85S	14x6 ET45 ~~5x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.