Skip to content

2024 Toyota Granvia tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Toyota Granvia.

Bolt pattern

2 generations were sold in 2024. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Granvia XL40

2023 – 2027 1 trim

Granvia 2.5

243 hp · 2.5 L Hybrid 2.5 L 235/65 R17 4 fitments
GenerationXL40 2023–2027
MarketChina
Power243 hp
Engine2.5 L Hybrid 2.5 L, Hybrid
Center bore75.1 mm
PCD6x130
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/65 R1717x7 ET40 6x13035TiresRims
Alt235/60 R1818x7.5 ET40 6x13035TiresRims
Alt235/55 R1919x7.5 6x13036TiresRims
Alt235/50 R2020x7.5 ET40 6x13036TiresRims

Toyota Granvia H33

2019 – 2027 Australia market 2 trims

Granvia 2.8 D

174 hp · 2.8 L Diesel 2.8 L 235/60 R17 2 fitments
GenerationH33 2019–2027
MarketSoutheast Asia
Power174 hp
Engine2.8 L Diesel 2.8 L, Diesel
Center bore75.1 mm
PCD6x130
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/60 R1717x7 ET55 6x13044 F / 51 RTiresRims
Alt235/55 R1818x7.5 ET50 6x13041 F / 46 RTiresRims

Granvia 3.5 VVT-i

270 hp · 3.5 L Petrol 3.5 L x 2 fitments
GenerationH33 2019–2027
MarketMiddle East
Power270 hp
Engine3.5 L Petrol 3.5 L, Petrol
Center bore75.1 mm
PCD6x130
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEx 6x13044Tires
Altx 6x13041Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.