2017 Toyota Kluger tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2017 Toyota Kluger.

2017 Toyota Kluger tire sizes

245/60R18 245/55R19

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2017 – 2020 Australia market 1 trim

292 hp · 2GR-FKS V6 245/60 R18 105T 2 fitments

GenerationIII (XU50) Facelift 2017–2020

Power292 hp

Engine2GR-FKS V6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/60 R18 105T	18x7.5 ET30 ~~5x114.3~~	35	Tires Rims
245/55 R19 103T	19x7.5 ET30 ~~5x114.3~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.