2020 Toyota Kluger tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Toyota Kluger.

2020 Toyota Kluger tire sizes

235/65R18 235/55R20 245/60R18 245/55R19

Bolt pattern

5x114.3

2 generations were sold in 2020. Check your chassis code before ordering wheels.

Other years

2016 2017 2018 2019 2020 2021 2022 2023 All 2000–2026

Fitment tables

3 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Kluger IV (XU70)

2020 – 2027 2 trims

Kluger 2.5 HEV

190 hp · 2.5L A25A-FXS I4 235/55 R20 2 fitments

GenerationIV (XU70) 2020–2027

Power190 hp

Engine2.5L A25A-FXS I4, Hybrid

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/55 R20	20x8 ET30 ~~5x114.3~~	–	Tires Rims
235/65 R18 105T	18x8 ET35 ~~5x114.3~~	35	Tires Rims

Kluger 3.5i

292 hp · 3.5L 2GR-FKS V6 235/65 R18 105T 2 fitments

GenerationIV (XU70) 2020–2027

Power292 hp

Engine3.5L 2GR-FKS V6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/65 R18 105T	18x8 ET35 ~~5x114.3~~	35	Tires Rims
235/55 R20	20x8 ET30 ~~5x114.3~~	35	Tires Rims

Toyota Kluger III (XU50) Facelift

2017 – 2020 Australia market 1 trim

Kluger 3.5i

292 hp · 2GR-FKS V6 245/60 R18 105T 2 fitments

GenerationIII (XU50) Facelift 2017–2020

Power292 hp

Engine2GR-FKS V6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/60 R18 105T	18x7.5 ET30 ~~5x114.3~~	35	Tires Rims
245/55 R19 103T	19x7.5 ET30 ~~5x114.3~~	33	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.