1987 Toyota MR2 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1987 Toyota MR2.

1987 Toyota MR2 tire sizes

185/60R14 195/60R14 205/60R14

Bolt pattern

4x100

Other years

1984 1985 1986 1987 1988 1989 1990 1991 All 1984–2000

Fitment tables

5 trims sold in 1987

Open a trim for its factory package and every alternative size, front and rear.

Toyota MR2 I (W10)

1984 – 1990 5 trims

MR2 1.5 (AW10)

82 hp · I4 185/60 R14 82H 1 fitment

GenerationI (W10) 1984–1990

MarketJapan

Power82 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/60 R14 82H	14x5.5 ET45 ~~4x100~~	–	Tires Rims

MR2 1.6

112 hp · I4 195/60 R14 / 205/60 R14 1 fitment

GenerationI (W10) 1984–1990

MarketUSA

Power112 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front195/60 R14	14x6.5 ET40 ~~4x100~~	–	Tires Rims
Rear205/60 R14	14x6.5 ET40 ~~4x100~~	–	Tires Rims

MR2 1.6

122 hp · I4 185/60 R14 82H 1 fitment

GenerationI (W10) 1984–1990

MarketEurope

Power122 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/60 R14 82H	14x6 ET35 ~~4x100~~	2	Tires Rims

MR2 1.6 (AW11)

129 hp · I4 185/60 R14 82H 1 fitment

GenerationI (W10) 1984–1990

MarketJapan

Power129 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/60 R14 82H	14x5.5 ET45 ~~4x100~~	–	Tires Rims

MR2 1.6 Turbo (AW11)

143 hp · I4 185/60 R14 82H 1 fitment

GenerationI (W10) 1984–1990

MarketJapan

Power143 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/60 R14 82H	14x5.5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.