Skip to content

1990 Toyota MR2 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1990 Toyota MR2.

Bolt patterns
5x114.3
II (W20)
4x100
I (W10)

2 generations were sold in 1990. Check your chassis code before ordering wheels.

Fitment tables

5 trims sold in 1990

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota MR2 II (W20)

1989 – 2000 4 trims

MR2 2.0

154 hp · 2.0L 3S-GE I4 195/60 VR14 / 205/60 VR14 2 fitments
GenerationII (W20) 1989–2000
MarketEurope
Power154 hp
Engine2.0L 3S-GE I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front195/60 VR1414x6 ET45 5x114.3–TiresRims
Rear205/60 VR1414x7 ET45 5x114.3–TiresRims
Front195/55 R15 85V15x6 ET45 5x114.329TiresRims
Rear225/50 R15 91W15x7 ET45 5x114.333TiresRims

MR2 2.0

173 hp · 2.0L I4 195/60 VR14 2 fitments
GenerationII (W20) 1989–2000
MarketEurope
Power173 hp
Engine2.0L I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 VR1414x7 ET45 5x114.3–TiresRims
195/55 R15 85V15x7 ET45 5x114.32.3TiresRims

MR2 2.0 (SW20)

162 hp · I4 195/60 R14 85H / 205/60 R14 87H 2 fitments
GenerationII (W20) 1989–2000
MarketJapan
Power162 hp
EngineI4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front195/60 R14 85H14x6 ET45 5x114.3–TiresRims
Rear205/60 R14 87H14x7 ET45 5x114.3–TiresRims
Front195/55 R15 83V15x6 ET45 5x114.3–TiresRims
Rear225/50 R15 91V15x7 ET45 5x114.3–TiresRims

MR2 2.0 Turbo (SW20)

221 hp · I4 195/55 R15 83V 1 fitment
GenerationII (W20) 1989–2000
MarketJapan
Power221 hp
EngineI4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 83V15x7 ET45 5x114.3–TiresRims

Toyota MR2 I (W10)

1984 – 1990 1 trim

MR2 1.6

122 hp · I4 185/60 R14 82H 1 fitment
GenerationI (W10) 1984–1990
MarketEurope
Power122 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R14 82H14x6 ET35 4x1002TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.