Skip to content

1998 Toyota MR2 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Toyota MR2.

1998 Toyota MR2 tire sizes

Bolt pattern
Fitment tables

4 trims sold in 1998

Open a trim for its factory package and every alternative size, front and rear.

Toyota MR2 II (W20)

1989 – 2000 4 trims

MR2 2.0

154 hp · 2.0L 3S-GE I4 195/60 VR14 / 205/60 VR14 2 fitments
GenerationII (W20) 1989–2000
MarketEurope
Power154 hp
Engine2.0L 3S-GE I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front195/60 VR1414x6 ET45 5x114.3–TiresRims
Rear205/60 VR1414x7 ET45 5x114.3–TiresRims
Front195/55 R15 85V15x6 ET45 5x114.329TiresRims
Rear225/50 R15 91W15x7 ET45 5x114.333TiresRims

MR2 2.0

173 hp · 2.0L I4 195/60 VR14 / 205/60 VR14 2 fitments
GenerationII (W20) 1989–2000
MarketEurope
Power173 hp
Engine2.0L I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front195/60 VR1414x6 ET45 5x114.3–TiresRims
Rear205/60 VR1414x7 ET45 5x114.3–TiresRims
Front195/55 R15 85V15x6 ET45 5x114.329TiresRims
Rear225/50 ZR15 91W15x7 ET45 5x114.333TiresRims

MR2 2.0 Turbo (SW20)

241 hp · I4 195/55 R15 84V / 225/50 R15 91V 1 fitment
GenerationII (W20) 1989–2000
MarketJapan
Power241 hp
EngineI4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front195/55 R15 84V15x6 ET45 5x114.3–TiresRims
Rear225/50 R15 91V15x7 ET45 5x114.3–TiresRims

MR2 2.0 VVT-i (SW20)

197 hp · I4 195/55 R15 84V 1 fitment
GenerationII (W20) 1989–2000
MarketJapan
Power197 hp
EngineI4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 84V15x7 ET45 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.