2000 Toyota MR2 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Toyota MR2.

2000 Toyota MR2 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1989 – 2000 2 trims

154 hp · 2.0L 3S-GE I4 195/60 VR14 / 205/60 VR14 2 fitments

GenerationII (W20) 1989–2000

Power154 hp

Engine2.0L 3S-GE I4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front195/60 VR14	14x6 ET45 ~~5x114.3~~	–	Tires Rims
Rear205/60 VR14	14x7 ET45 ~~5x114.3~~	–	Tires Rims
Front195/55 R15 85V	15x6 ET45 ~~5x114.3~~	29	Tires Rims
Rear225/50 R15 91W	15x7 ET45 ~~5x114.3~~	33	Tires Rims

173 hp · 2.0L I4 195/60 VR14 / 205/60 VR14 2 fitments

GenerationII (W20) 1989–2000

Power173 hp

Engine2.0L I4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front195/60 VR14	14x6 ET45 ~~5x114.3~~	–	Tires Rims
Rear205/60 VR14	14x7 ET45 ~~5x114.3~~	–	Tires Rims
Front195/55 R15 85V	15x6 ET45 ~~5x114.3~~	29	Tires Rims
Rear225/50 ZR15 91W	15x7 ET45 ~~5x114.3~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.