2004 Toyota Porte tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Toyota Porte.

2004 Toyota Porte tire sizes

175/70R14 185/60R15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2004 – 2012 Japan market 2 trims

86 hp · 2NZ-FE I4 175/70 R14 84S 2 fitments

GenerationI 2004–2012

Power86 hp

Engine2NZ-FE I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R14 84S	14x5.5 ET33 ~~4x100~~	32	Tires Rims
185/60 R15 84H	15x5.5 ET35 ~~4x100~~	32	Tires Rims

107 hp · 1NZ-FE I4 175/70 R14 84S 2 fitments

GenerationI 2004–2012

Power107 hp

Engine1NZ-FE I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R14 84S	14x5.5 ET33 ~~4x100~~	32	Tires Rims
185/60 R15 84H	15x6 ET35 ~~4x100~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.