Skip to content

2022 Toyota Sienna tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 Toyota Sienna.

2022 Toyota Sienna tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear.

Toyota Sienna IV (XL40)

2021 – 2027 USA market 3 trims

Sienna 2.5

243 hp · 2.5L A25A-FXS I4 235/65 R17 103T 4 fitments
GenerationIV (XL40) 2021–2027
MarketUSA
Power243 hp
Engine2.5L A25A-FXS I4, Hybrid
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/65 R17 103T17x7 ET40 5x114.335TiresRims
235/60 R18 102V18x7.5 ET40 5x114.335TiresRims
235/55 R19 101V19x7.5 5x114.336TiresRims
235/50 R20 100V20x7.5 ET40 5x114.336TiresRims

Sienna 2.5

245 hp · 2.5L A25A-FXS I4 235/65 R17 103T 4 fitments
GenerationIV (XL40) 2021–2027
MarketUSA
Power245 hp
Engine2.5L A25A-FXS I4, Hybrid
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/65 R17 103T17x7 ET40 5x114.335TiresRims
235/60 R18 102V18x7.5 ET40 5x114.335TiresRims
235/55 R19 101V19x7.5 5x114.336TiresRims
235/50 R20 100V20x7.5 ET40 5x114.336TiresRims

Sienna 2.5

240 hp · 2.5L A25A-FXS I4 235/65 R17 103T 4 fitments
GenerationIV (XL40) 2021–2027
MarketMexico
Power240 hp
Engine2.5L A25A-FXS I4, Hybrid
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/65 R17 103T17x7 ET40 5x114.335TiresRims
235/60 R18 102V18x7.5 ET40 5x114.335TiresRims
235/55 R19 101V19x7.5 5x114.336TiresRims
235/50 R20 100V20x7.5 ET40 5x114.336TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.