1988 Toyota Sprinter Carib tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 Toyota Sprinter Carib.

1988 Toyota Sprinter Carib tire sizes

185/70R13

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1988 – 1995 1 trim

99 hp · I4 165x SR13 2 fitments

GenerationII 1988–1995

Power99 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x SR13	13x5 ET39 ~~4x100~~	–	Tires Rims
185/70 R13 85S	13x5.5 ET39 ~~4x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.