1978 Toyota Starlet tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1978 Toyota Starlet.

1978 Toyota Starlet tire sizes

155/80R13 165/70R13

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1978 – 1980 3 trims

44 hp · I4 145x R13 75S 3 fitments

GenerationII (P60) 1978–1980

MarketEurope

Power44 hp

EngineI4, Petrol

Center bore60.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R13 75S	13x5 ET45 ~~4x114.3~~	26	Tires Rims
155/80 R13 79T	13x5 ET45 ~~4x114.3~~	28	Tires Rims
165/70 R13 79T	13x5 ET45 ~~4x114.3~~	28	Tires Rims

52 hp · I4 145x R13 75S 3 fitments

GenerationII (P60) 1978–1980

MarketEurope

Power52 hp

EngineI4, Petrol

Center bore60.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R13 75S	13x5 ET45 ~~4x114.3~~	26	Tires Rims
155/80 R13 79T	13x5 ET45 ~~4x114.3~~	28	Tires Rims
165/70 R13 79T	13x5 ET45 ~~4x114.3~~	28	Tires Rims

71 hp · 4K-U I4 6.00x R12 6 fitments

GenerationII (P60) 1978–1980

MarketJapan

Power71 hp

Engine4K-U I4, Petrol

Center bore60.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
6.00x R12	12x4 ~~4x114.3~~	–	Tires Rims
155x SR12	12x4 ~~4x114.3~~	–	Tires Rims
145x SR13	13x4.5 ~~4x114.3~~	–	Tires Rims
145x R13 75S	13x5 ET45 ~~4x114.3~~	26	Tires Rims
155/80 R13 79T	13x5 ET45 ~~4x114.3~~	28	Tires Rims
165/70 R13 79T	13x5 ET45 ~~4x114.3~~	28	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.