Skip to content

1980 Toyota Starlet tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1980 Toyota Starlet.

1980 Toyota Starlet tire sizes

Bolt pattern

2 generations were sold in 1980. Check your chassis code before ordering wheels.

Fitment tables

5 trims sold in 1980

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Starlet II (P60) Facelift

1980 – 1983 2 trims

Starlet 1.0

44 hp · I4 145x R13 75S 3 fitments
GenerationII (P60) Facelift 1980–1983
MarketEurope
Power44 hp
EngineI4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145x R13 75S13x5 ET45 4x114.326TiresRims
155/80 R13 79T13x5 ET45 4x114.328TiresRims
165/70 R13 79T13x5 ET45 4x114.328TiresRims

Starlet 1.2

52 hp · I4 145x R13 75S 3 fitments
GenerationII (P60) Facelift 1980–1983
MarketEurope
Power52 hp
EngineI4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145x R13 75S13x5 ET45 4x114.326TiresRims
155/80 R13 79T13x5 ET45 4x114.328TiresRims
165/70 R13 79T13x5 ET45 4x114.328TiresRims

Toyota Starlet II (P60)

1978 – 1980 3 trims

Starlet 1.0

44 hp · I4 145x R13 75S 3 fitments
GenerationII (P60) 1978–1980
MarketEurope
Power44 hp
EngineI4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145x R13 75S13x5 ET45 4x114.326TiresRims
155/80 R13 79T13x5 ET45 4x114.328TiresRims
165/70 R13 79T13x5 ET45 4x114.328TiresRims

Starlet 1.2

52 hp · I4 145x R13 75S 3 fitments
GenerationII (P60) 1978–1980
MarketEurope
Power52 hp
EngineI4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145x R13 75S13x5 ET45 4x114.326TiresRims
155/80 R13 79T13x5 ET45 4x114.328TiresRims
165/70 R13 79T13x5 ET45 4x114.328TiresRims

Starlet 1.3 (E-KP61)

71 hp · 4K-U I4 6.00x R12 6 fitments
GenerationII (P60) 1978–1980
MarketJapan
Power71 hp
Engine4K-U I4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
6.00x R1212x4 4x114.3–TiresRims
155x SR1212x4 4x114.3–TiresRims
145x SR1313x4.5 4x114.3–TiresRims
145x R13 75S13x5 ET45 4x114.326TiresRims
155/80 R13 79T13x5 ET45 4x114.328TiresRims
165/70 R13 79T13x5 ET45 4x114.328TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.