Skip to content

2008 Brilliance M2 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Brilliance M2.

2008 Brilliance M2 tire sizes

Bolt pattern
Fitment tables

5 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

Brilliance M2 I

2006 – 2010 5 trims

M2 1.6i

99 hp · 1.6L BL16L I4 195/65 R15 1 fitment
GenerationI 2006–2010
MarketChina
Power99 hp
Engine1.6L BL16L I4, Petrol
Center bore67.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R1515x6 ET42 5x108TiresRims

M2 1.8i

134 hp · 1.8L 4G93 I4 205/55 R16 2 fitments
GenerationI 2006–2010
MarketEurope
Power134 hp
Engine1.8L 4G93 I4, Petrol
Center bore67.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R1616x7 ET45 5x108TiresRims
195/65 R1515x6.5 ET45 5x108TiresRims

M2 1.8i

134 hp · 1.8L 4G93 I4 205/55 R16 1 fitment
GenerationI 2006–2010
MarketChina
Power134 hp
Engine1.8L 4G93 I4, Petrol
Center bore67.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R1616x7 ET42 5x108TiresRims

M2 1.8T

168 hp · BL18T I4 205/55 R16 1 fitment
GenerationI 2006–2010
MarketChina
Power168 hp
EngineBL18T I4, Petrol
Center bore67.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R1616x7 ET42 5x108TiresRims

M2 2.0i

127 hp · 2.0L 4G63 I4 205/55 R16 1 fitment
GenerationI 2006–2010
MarketChina
Power127 hp
Engine2.0L 4G63 I4, Petrol
Center bore67.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R1616x7 ET42 5x108TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.