2011 Brilliance M2 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Brilliance M2.

2011 Brilliance M2 tire sizes

205/55R16 215/55R17 195/65R15

Bolt pattern

5x108

Other years

2006 2007 2008 2009 2010 2011 All 2006–2011

Fitment tables

4 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Brilliance M2 II

2010 – 2011 4 trims

M2 1.6i

117 hp · BL16L I4 195/65 R15 1 fitment

GenerationII 2010–2011

Power117 hp

EngineBL16L I4, Petrol

Center bore67.1 mm

PCD5x108

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15	15x6 ET42 ~~5x108~~	–	Tires Rims

M2 1.8i

127 hp · I4 205/55 R16 1 fitment

GenerationII 2010–2011

Power127 hp

EngineI4, Petrol

Center bore67.1 mm

PCD5x108

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/55 R16	16x7 ET42 ~~5x108~~	–	Tires Rims

M2 1.8T

168 hp · BL18T I4 205/55 R16 2 fitments

GenerationII 2010–2011

Power168 hp

EngineBL18T I4, Petrol

Center bore67.1 mm

PCD5x108

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/55 R16	16x7 ET42 ~~5x108~~	–	Tires Rims
215/55 R17	17x7.5 ET38 ~~5x108~~	–	Tires Rims

M2 2.0i

137 hp · I4 215/55 R17 1 fitment

GenerationII 2010–2011

Power137 hp

EngineI4, Petrol

Center bore67.1 mm

PCD5x108

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/55 R17	17x7.5 ET38 ~~5x108~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.