2018 Lynk&Co 03 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2018 Lynk&Co 03.

2018 Lynk&Co 03 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2018 – 2023 2 trims

154 hp · JLH-3G15TDC I3 205/60 R16 1 fitment

Generation03 2018–2023

Power154 hp

EngineJLH-3G15TDC I3, Petrol

Center bore63.4 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16	~~5x108~~	–	Tires

177 hp · I3 215/50 R17 3 fitments

Generation03 2018–2023

Power177 hp

EngineI3, Petrol

Center bore63.4 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/50 R17	~~5x108~~	–	Tires
205/60 R16	~~5x108~~	–	Tires
225/45 R18	~~5x108~~	–	Tires

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.