Skip to content

2021 Lynk&Co 03 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Lynk&Co 03.

2021 Lynk&Co 03 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2021

Open a trim for its factory package and every alternative size, front and rear.

Lynk&Co 03 CS11

2018 – 2023 2 trims

03 1.5 T (Saloon)

80 hp · 1.5 L JLH-3G15TD I3 Petrol 1.5 L JLH-3G15TD I3 225/45 R18 3 fitments
GenerationCS11 2018–2023
MarketChina
Power80 hp
Engine1.5 L JLH-3G15TD I3 Petrol 1.5 L JLH-3G15TD I3, Petrol
Center bore63.4 mm
PCD5x108
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/45 R1818x7.5 ET50 5x108–TiresRims
Alt215/50 R1717x7 ET50 5x108–TiresRims
Alt245/35 R1919x8 ET50 5x108–TiresRims

03 2.0 T (Saloon)

188 hp · 2.0 L JLH-4G20TD I4 Petrol 2.0 L JLH-4G20TD I4 215/50 R17 3 fitments
GenerationCS11 2018–2023
MarketChina
Power188 hp
Engine2.0 L JLH-4G20TD I4 Petrol 2.0 L JLH-4G20TD I4, Petrol
Center bore63.4 mm
PCD5x108
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/50 R1717x7 ET50 5x108–TiresRims
OE225/45 R1818x7.5 ET50 5x108–TiresRims
Alt245/35 R1919x8 ET50 5x108–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.