2019 Lynk&Co 03 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Lynk&Co 03.

2019 Lynk&Co 03 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2018 – 2023 2 trims

177 hp · I3 215/50 R17 3 fitments

Generation03 2018–2023

Power177 hp

EngineI3, Petrol

Center bore63.4 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/50 R17	~~5x108~~	–	Tires
205/60 R16	~~5x108~~	–	Tires
225/45 R18	~~5x108~~	–	Tires

188 hp · I4 225/45 R18 3 fitments

Generation03 2018–2023

Power188 hp

EngineI4, Petrol

Center bore63.4 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/45 R18	~~5x108~~	–	Tires
205/60 R16	~~5x108~~	–	Tires
215/50 R17	~~5x108~~	–	Tires

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.