Skip to content

2005 Mercedes-Benz CL-Class AMG tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Mercedes-Benz CL-Class AMG.

2005 Mercedes-Benz CL-Class AMG tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Mercedes-Benz CL-Class AMG C215

2000 – 2006 Europe market 2 trims

CL-Class AMG CL 55 AMG

493 hp · 5.4L M 113 E 55 ML V8 245/45 ZR18 99Y / 265/40 ZR18 101Y 2 fitments
GenerationC215 2000–2006
Power493 hp
Engine5.4L M 113 E 55 ML V8, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/45 ZR18 99Y18x8 ET44 5x11229TiresRims
Rear265/40 ZR18 101Y18x9 ET46 5x11232TiresRims
Front245/45 ZR19 98Y19x8.5 ET44 5x11230TiresRims
Rear275/35 ZR19 100Y19x9.5 ET46 5x11233TiresRims

CL-Class AMG CL 65 AMG

603 hp · 6.0L M 275 E 60 AL V12 245/40 ZR19 98Y / 275/35 ZR19 100Y 2 fitments
GenerationC215 2000–2006
Power603 hp
Engine6.0L M 275 E 60 AL V12, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/40 ZR19 98Y19x8.5 ET44 5x11230TiresRims
Rear275/35 ZR19 100Y19x9.5 ET60 5x11233TiresRims
Front255/35 ZR20 99Y20x9 ET40 5x11233TiresRims
Rear285/30 ZR20 101Y20x10 ET50 5x11236TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.